DR1998:0089:003 R/V
1974-1979
DR1966:0001:019 R/V
Description:
- This drawing for a proposed tomb includes sketches for figure sculpture and bas-relief on either side of the aedicule. On the verso there are a few small sketches and a sketch plan for a monument, possibly related to the design on the recto.
architecture, design d'intérieur
between 1715 and 1773
Elevation for a monument for a secular ruler; verso: Plan for a monument for a secular ruler and sketch for a canopy
Actions:
DR1966:0001:019 R/V
Description:
- This drawing for a proposed tomb includes sketches for figure sculpture and bas-relief on either side of the aedicule. On the verso there are a few small sketches and a sketch plan for a monument, possibly related to the design on the recto.
architecture, design d'intérieur
DR1966:0001:066 R/V
Description:
- The drawing on the recto is a rendering of a palazzo façade. The verso includes a plan of a six-sided structure and several smaller sketches, including one sketch elevation of a window.
architecture
between 1755 and 1760
Elevation for a palazzo façade; verso: Sketches
Actions:
DR1966:0001:066 R/V
Description:
- The drawing on the recto is a rendering of a palazzo façade. The verso includes a plan of a six-sided structure and several smaller sketches, including one sketch elevation of a window.
architecture
Drawing for an ornamental vase with galatea and tritons; verso: Sketch for an ornamental vase
DR1966:0001:079 R/V
Description:
- Design for a vase with two handles in the shapes of mermen. The surface of the vase is covered with relief sculpture. The sketch on the recto is for a pitcher; the outer edge of the handle was cut off when the sheet was trimmed.
design d'intérieur
between 1715 and 1773
Drawing for an ornamental vase with galatea and tritons; verso: Sketch for an ornamental vase
Actions:
DR1966:0001:079 R/V
Description:
- Design for a vase with two handles in the shapes of mermen. The surface of the vase is covered with relief sculpture. The sketch on the recto is for a pitcher; the outer edge of the handle was cut off when the sheet was trimmed.
design d'intérieur
DR1966:0001:091 R/V
Description:
- This incomplete manuscript consists of four columns of text over both sides of a sheet. It is apparently the last page of a larger text, since it begins without a title or introduction and ends with a signature. The document discusses changes to the harbour at Fano. It makes reference to accompanying drawings (not included).
ingénierie
ca. 1765
Page from a memorandum on improvements to the port of Fano
Actions:
DR1966:0001:091 R/V
Description:
- This incomplete manuscript consists of four columns of text over both sides of a sheet. It is apparently the last page of a larger text, since it begins without a title or introduction and ends with a signature. The document discusses changes to the harbour at Fano. It makes reference to accompanying drawings (not included).
ingénierie
DR1966:0001:104 R/V
architecture
1729
Plan of San Giovanni in Laterano, including temporary galleries in the apse and crossing; verso: Moulding profile
Actions:
DR1966:0001:104 R/V
architecture
DR1964:0016:002 R/V
Description:
- This elevation is for an altarpiece frame which has a single rectangular panel surmounted by an entablature and sculpted birds within an arched surround. The frame is embellished with consoles and rosettes. Red wash is used, probably to indicate marble panels. The sketch on the verso is probably also for an altarpiece frame. It is composed of a rectangular frame with classical elements characteristic of Italian altarpiece frames.
architecture
16th century
Elevation for an altarpiece frame; verso: Sketch for a frame, probably for an altarpiece
Actions:
DR1964:0016:002 R/V
Description:
- This elevation is for an altarpiece frame which has a single rectangular panel surmounted by an entablature and sculpted birds within an arched surround. The frame is embellished with consoles and rosettes. Red wash is used, probably to indicate marble panels. The sketch on the verso is probably also for an altarpiece frame. It is composed of a rectangular frame with classical elements characteristic of Italian altarpiece frames.
architecture
Plan, possibly for a house
DR1981:0021:004 R/V
ca. 1784
DR1981:0021:007 R/V
ca. 1784
Ground plan and elevation for a house; verso: Roof elevations for a house
Actions:
DR1981:0021:007 R/V
DR1978:0008:009 R/V
Description:
- This sheet of three drawings for Castello di Rivoli, Turin, includes a partial section through a split level staircase, showing the articulation of the wall behind the staircase; a section through part of the building, which includes what appears to be the exterior articulation; and a plan for a room on the verso.
architecture
between 1714 and 1721
Elevation and section for a staircase, Castello di Rivoli, Turin; verso: Partial plan for Castello di Rivoli, Turin
Actions:
DR1978:0008:009 R/V
Description:
- This sheet of three drawings for Castello di Rivoli, Turin, includes a partial section through a split level staircase, showing the articulation of the wall behind the staircase; a section through part of the building, which includes what appears to be the exterior articulation; and a plan for a room on the verso.
architecture