The planet is the client

This issue is a reader for a particular, activist blend of architectural approaches to the environment. It establishes a bit of (tendentious) context; it defines, and redefines, and argues over certain terms, clarifying the attitudes behind them; it documents our mistakes as evenly as our successes, so we can really understand where we’ve been and where we are now. And since we’re still hoping, it puts forward new design possibilities—which we promise don’t all originate in the 1970s. Your help on that would be greatly appreciated.

Article 7 of 13

The Kelbaugh House

Text by Pierre-Édouard Latouche

Douglas Kelbaugh. Kelbaugh House: information letter, c. 1977. ARCH278513

Douglas Kelbaugh. Kelbaugh House: information sheet, c. 1977. ARCH278514

Douglas Kelbaugh acknowledges he was unfamiliar with solar architecture in 1973 when he started designing his home in Princeton, New Jersey.1 Then a recent graduate of Princeton University’s School of Architecture, Kelbaugh discovered solar as an option when he saw a schematic section of a Trombe wall in a European design magazine. Impressed by the astonishing simplicity of the system, he decided to adapt it to local conditions.

The lot Kelbaugh owned was mostly shaded, so he built the house on the only sunny portion, the northeast corner, with a footprint of 92 square metres. To achieve 195 square metres of space meant building a two-storey structure, and consequently the equivalent of two Trombe walls, one on top of the other, which had never been done before. Construction began in 1974.

  1. Author’s conversation with Douglas Kelbaugh, Ann Arbor, Michigan, April 2007. 

Section showing air circulation and heat radiation, c. 1975. ARCH254191

Built of poured concrete and painted with a black selective coating, the Trombe wall has a surface area of 56 square metres and is 38 centimetres thick. It is penetrated by six windows and an opening giving access to the greenhouse, which is attached to the double-glazed curtain-wall covering the south facade. The Trombe wall follows architect Jacques Michel’s model that provides heating in winter and cooling in summer. The well-insulated, wood-frame house is essentially a lean-to, supported by the thick concrete wall. An admirer of Le Corbusier, Kelbaugh included references to his work in this house, such as bright colours for the interior shutters, cedar plywood siding, and niches/shelves cast into the inside of the Trombe wall.

Trombe wall with greenhouse in winter, c. 1976. ARCH254204

During its first winter, 1975–76, the passive heating system produced large-scale energy savings. However, several major problems lowered overall performance: reverse convection at night, night-time heat loss through the large opening into the colder greenhouse, and heat rising to the second floor via the open stairwell, as shown by a series of readings taken by Douglas Balcomb of the Los Alamos laboratory in December 1977. Measurement devices located downstairs, upstairs, and in the greenhouse recorded that the indoor temperature remained relatively stable, with a daily swing between 13 and 24 degrees Celsius and an average of about 17 degrees Celsius, while the outside temperature ranged widely, from -13 to 14 degrees Celsius.1 Modifications over several years gradually solved or minimized these problems.

  1. Douglas Kelbaugh, “Kelbaugh House: Recent Performance,” in Proceedings of the 2nd National Passive Solar Conference (Newark, Delaware: American Section of the International Solar Energy Society, 1978), 69–75. 

Sketch for installation of a Zomeworks Big Fin solar-heated water system in greenhouse, 1980. ARCH254207

The origin of the Kelbaugh House concept, and the various problems and adjustments that marked its first years of occupancy, illustrate the experimental nature of solar houses built in the wake of the 1973 oil crisis. Despite many twentieth-century precedents, solar building was still largely unexplored terrain. Douglas Kelbaugh expanded on his experience, founding Kelbaugh & Lee in 1978. The firm realized some twenty projects during its lifespan (until 1985), and won fifteen design awards, including an American Institute of Architects National Honor Award for the Roosevelt Solar Village in New Jersey.

This text and its accompanying illustrations were first published in our 2007 book Sorry, Out of Gas. The letter and fact sheet at the top of the page come from the Douglas Kelbaugh fonds, which includes material and other documentation related to over twenty of Kelbaugh & Lee’s projects.


Sign up to get news from us

Email address
First name
Last name
By signing up you agree to receive our newsletter and communications about CCA activities. You can unsubscribe at any time. For more information, consult our privacy policy or contact us.

Thank you for signing up. You'll begin to receive emails from us shortly.

We’re not able to update your preferences at the moment. Please try again later.

You’ve already subscribed with this email address. If you’d like to subscribe with another, please try again.

This email was permanently deleted from our database. If you’d like to resubscribe with this email, please contact us

Please complete the form below to buy:
[Title of the book, authors]
ISBN: [ISBN of the book]
Price [Price of book]

First name
Last name
Address (line 1)
Address (line 2) (optional)
Postal code
Email address
Phone (day) (optional)

Thank you for placing an order. We will contact you shortly.

We’re not able to process your request at the moment. Please try again later.

Folder ()

Your folder is empty.

Please complete this form to make a request for consultation. A copy of this list will also be forwarded to you.

Your contact information
First name:
Last name:
Phone number:
Notes (optional):
We will contact you to set up an appointment. Please keep in mind that your consultation date will be based on the type of material you wish to study. To prepare your visit, we'll need:
  • — At least 2 weeks for primary sources (prints and drawings, photographs, archival documents, etc.)
  • — At least 48 hours for secondary sources (books, periodicals, vertical files, etc.)